How to Change the Honda Odyssey Battery

Replacement of the battery on a Honda Odyssey is a speedy and simple maintenance job that may be accomplished in a couple of minutes. With nuts holding everything in to place, even in the event you are the most novice of mechanics, you can perform this job without any issues or issues.

Tools You'll Need:

• TEKTON Combination Wrench Set, SAE/Metric, 24-Piece
• TEKTON 1230 3/8" Drive Deep Socket Set, 10-19mm, Metric, 8 Sockets
• Odyssey Battery

Disconnect the battery ground cable using the ratchet as well as a socket. Wait to minutes for the passenger air bag backup capacitor to discharge.

Push in on the top of the glove box on both sides to unhook the glove box from the dash. Swing the glove box down toward the floor of the Odyssey.

The installation will be the removal method in reverse. Setting the new battery in to place beneath the hood, connect the positive and negative cables back onto the battery.

This ought to not be a difficult method to figure out which wire is which because they have been designed not to reach other to the other post to prevent mix up.

 In the event you have trouble, however, the red cable will go onto the positive and black onto the negative. They will be identified by a symbol above each post on the battery.

Press the right and left sides of the glove compartment in to detach it and permit it to be lowered toward the floor.


Resources:
Honda Odyssey (Haynes Repair Manual)